
| Podle max .počtu CPU: | 2 |
| Podle počtu pam. slotů: | 18 |
| Podle procesoru: | Intel Xeon E5645 |
| Podle počtu USB: | 5 |
| Podle rozhraní HDD: | SAS+SATA II |
| Podle počtu HDD: | 2 |
| Podle max. paměti: | 192 GB |
| Podle velikosti paměti: | 12288 |
| Podle typu paměti: | DDR3 |
| Podle frekvence pamětí: | 1333 |
| Podle celkové velikosti HDD: | 600 GB |
| Podle frekvence CPU: | 2400 |
| Podle optické mechaniky: | DVD RW |
| Podle počtu jader CPU: | 6 |
| Podle patice CPU: | SCK 1366 |
| Podle počtu pozic 3,5": | N/A |
| Podle počtu pozic 5,25": | N/A |
| Podle počtu portů RJ-45: | 4 |
| Podle skříně: | Rack |
| Podle počtu pozic 2,5": | 8 |
583914-B21
HP DL380G7 SFF CTO Chassis
1
633420-421
HP DL380 G7 Intel Xeon E5645 (2.40GHz/6-core/12MB/80W) Processor Kit
1
500658-B21
HP 4GB 2Rx4 PC3-10600R-9 Kit
3
503296-B21
HP 460W CS Gold Ht Plg Pwr Supply Kit
1
462967-B21
HP 512MB P-Series BBWC Upgrade
1
481043-B21
HP Slim 12.7mm SATA DVDRW Optical Kit
1
507127-B21
HP 300GB 6G SAS 10K 2.5in DP ENT HDD
2
Processors:
(1) Intel® Xeon® Processor E5645 (2.40 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/1/1/2/2)
Intel® 5520 Chipset
12MB (1 x 12MB) Level 3 cache
Memory:
Total of 18 DIMM slots
12 GB (3 x 4 GB) PC3-10600R (DDR3-1333) Registered DIMMs
Up to 192 GB (16 GB kits populating12 DIMM slots), using PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2 DIMMs per Channel in 12 slots
NOTE: If only one processor is installed, only half the DIMM slots are available.
NOTE: when populating with the 16GB Memory Kits (Quad-Rank), only 12 DIMMs can be populated.
Two DIMMs Per Channel at 1333MHz supported with ROM update via ROM Based Setup Utility (RBSU) for 1333MHz RDIMMs. UDIMM support is only on 12-slot servers.
Storage Controller:
HP Smart Array P410i/512MB BBWC Controller
Available upgrades: 1G FBWC, 512MB FBWC, 256MB, 512MB with BBWC, Battery kit upgrade (for the 256MB cache), and Smart Array Advanced Pack (SAAP)
Internal Drive Support:
Hard Drive: 2x300Gb/10k
Standard (8) small form factor (SFF) hot-plug drive bays to support Serial-attached SCSI (SAS) and Serial ATA (SATA) drives
Optional second drive cage for additional (8) SFF drive bays (total 16)
Optional cage for (6) Large Form Factor SAS/SATA hard drive bays
Slimline media bay supporting Optical Drive (ships standard on performance models)
NOTE: The Optical Drive option is not available when you upgrade with the additional 8 SFF drive cage, or in the LFF Models
Network Controller:
Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports total) with TCP/IP Offload Engine, including support for Accelerated iSCSI
Expansion Slots:
Up to six available PCI-Express Gen2 slots, optional mixed PCI-X / PCI-Express or x16 PCI configurations available (see "Standard Features -Expansion Slots" section for more details)
Ports:
USB 2.0 support, 5 total ports: (2) ports up front; (2) ports in back; (1) port internal
5 total ports: (2) ports up front; (2) ports in back; (1) port internal
1 internal Secure Digital (SD) slot
Redundancy:
Fully redundant hot plug fans (N+1)
Hot plug power supply with optional redundancy (Included in Performance models)
Power Sources:
Dual Common Slot Bay for Right Sized, Hot plug and Redundant Power options
(1) 460W Hot Plug Power Supplies
HP 48V DC Power Supply (optional)
HP 1200W CS HE Silver Power Supply (optional)
HP 750W CS HE Gold Power Supply (optional)
Optical Drive:
DVDRW
Infrastructure Management:
Convenient slide-out Systems Insight Display for quick and easy front view server diagnostics, along with status LEDs, Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU)
HP Integrated Lights-Out (iLO) for ProLiant provides simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration.
HP Insight Control a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control supports both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's changing business requirements.
HP Insight Control No Media single server license, including 1 year of 24x7 Technical Support and Updates
Form Factor:
Rack (2U), (3.5-inch); Depth 27.25 inches (69.98 cm)
Operating Systems and Virtualization Software Support for ProLiant Servers:
Supports Windows, RHEL, SLES, OEL, Solaris, VMware, and Citrix XenServer
Deployment/Serviceability:
System Insight Display on the front bezel for quick and easy server diagnostics
Quick Deploy Rail System includes sliding universal rails, an ambidextrous cable management arm and quick release levers for fast and easy serviceability
Tool-less access to all system components for easy in rack serviceability
Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
Upozornění: Obrázek a informace o produktu mají pouze informativní charakter.