Home
Přihlášený zákazník: nepřihlášen [registrace]
          Reklamační řád Obchodní podmínky Kontakt Informace o službách

INTEL DX48BT2 BONETRAIL2, X48/ ICH9R, DDR3 1333, 2

Informace o produktu




Tento produkt již nelze objednat, byl vyřazen z aktuální nabídky.
Název produktu:
INTEL DX48BT2 BONETRAIL2, X48/ ICH9R, DDR3 1333, 2X PCIE X16, SATA II RAID, USB2.0, FW, GLAN, SC775,
Výrobce:
INTEL
Kód:
31245
PN:
BLKDX48BT2


Zařazení



Parametry produktu

Podle CPU: Intel
Podle patice: Socket 775
: 4
Podle typu paměti: DDR3
Podle slotu grafické karty: PCIE
Podle RAID: Ne
Podle formátu: ATX
: 1
Podle HDMI: Ne
Podle display portu: Ne


Popis produktu

Form factor: ATX (304.80 mm by 243.84 mm)
Processor Support:
45nm & 65nm Intel® Core™2 Quad processors/LGA775 socket with a 1600/1333/1066 MHz
45nm & 65nm Intel® Core™2 Extreme processors/LGA775 socket with a 1600/1333/1066 MHz
45nm & 65nm Intel® Core™2 Duo processors/LGA775 socket with a 1333/1066 MHz
Intel® Pentium® Dual-Core processor in an LGA775 socket with an 800 MHz


Memory:
4x 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets
DDR3 1600 MHz, DDR3 1333 MHz, DDR3 1066 MHz, or DDR3 800 MHz DIMMs
max 8 GB of system memory/ ECC and non-ECC memory

Chipset: Intel® X48 Express Chipset

Audio: Intel® High Definition Audio subsystem in the following configuration:
8-channel (7.1) Dolby Home Theater Audio subsystem with five analog audio outputs and two S/PDIF digital audio outputs (coaxial and optical) using the Sigmatel* 9274D audio codec

ATI* CrossFire* multi-GPU platform support:
ATI CrossFire technology enables two ATI* graphics cards to work together for ultimate 3D gaming performance and visual quality
Full support of Next Generation ATI Crossfire

I/O control: I/O controller for Consumer IR
LAN support: Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the Intel® 82566DC Gigabit Ethernet Controller
Peripheral interfaces:
12x USB 2.0 ports (8 external ports, 2 internal headers)
6x Serial ATA 3.0 Gb/s ports, including 2 eSATA ports with RAID support supplied by a Marvell* controller
2x IEEE-1394a ports (1 external port, 1 internal header)
Consumer IR receiver and emitter (via internal headers)
1x Parallel ATA IDE interface with UDMA 33, ATA-66/100 support (2 devices supported)

Expansion capabilities:
2x PCI Conventional* bus add-in card connectors (SMBus routed to both PCI Conventional bus add-in card connectors)
1x primary PCI Express* 2.0 x16 (electrical x16) bus add-in card connector
1x secondary PCI Express 2.0 x16 (electrical x16) bus add-in card connector
1x PCI Express* 1.0a x16 (electrical x4) bus add-in card connector



Upozornění: Obrázek a informace o produktu mají pouze informativní charakter.



Komentáře