Home
Přihlášený zákazník: nepřihlášen [registrace]
          Reklamační řád Obchodní podmínky Kontakt Informace o službách

3WARE ESCALADE 9550SXU - 4LP, 4 - KANÁLOVÝ SATA II

Informace o produktu




Tento produkt již nelze objednat, byl vyřazen z aktuální nabídky.
Název produktu:
3WARE ESCALADE 9550SXU - 4LP, 4 - KANÁLOVÝ SATA II ŘADIČ, PCI - X 64 - BIT/133MHZ, BULK
Výrobce:
3WARE
Kód:
19426
PN:
9550SXU-4LP SGL


Zařazení



Parametry produktu

Podle rozhraní: SATA Raid
: 4
Podle přenosové rychlosti: 300 Mbit/s
: 0
Podle rozhraní: PCIe


Popis produktu

*Balení obsahuje oba brakety jak standartní tak LP.

8th-generation StorSwitch™ non-blocking switched architecture.
* On-board I/O RISC processor and RAID offload provides true hardware RAID.
- SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives .
* Bootable array support for greater fault tolerance.
* Variable stripe size for performance tuning by application.
* 64-bit LBA support.
* ATA pass-through mode support.
* Up to 512MB DDR2 533 memory with ECC protection. (see table below)
* 32 pooled DMA channels.
* Complete configuration management suite.
- 3ware BIOS Manager 2 (3BM2) – easy to use BIOS configuration tool.
- 3ware Disk Manager 2 (3DM®2) – browser-based management tool.
- Command Line Interface (CLI) – scriptable configuration tool.
* SNMP support.
* SMTP support for email/pager notification.
* ATA/6 and Out of band (OOB) staggered drive spin-up support.
* Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN.
* Battery Backup Unit (BBU) support.
* Multiple logical unit sizes and RAID levels on one card.
* Multiple card support within a system for large storage requirements.
* Hot-swap and hot-spare support for data availability.
* Dynamic sector repair for robust data protection.
* S.M.A.R.T. disk drive monitoring for reliability.
* Emergency Flash Recovery protects against failed firmware upgrade.
* Drive activity LED support.
* Online Capacity Expansion and RAID Level Migration.
* Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal.
* Drive insertion and removal notification.
* Array/Drive Status and drive identification LED support. (requires 3ware Chassis Control Unit-enabled backplane)
* Chassis Control Unit for enclosure management via I2C.



Upozornění: Obrázek a informace o produktu mají pouze informativní charakter.



Komentáře