| Podle kapacity: | 256 MB |
| Podle rozhraní: | PATA |
| Podle formy: | Modul |
Apacer ATA-Disk Module II (ADM II) is a high performance, embedded flash memory data storage system. This product is well suited for solid-state mass storage applications offering new and expanded functionality while enabling cost-effective designs. The ADM II is a solid-state disk drive that is designed to replace a conventional IDE hard disk drive, and can be plugged into a standard IDE connector commonly found in desktop or portable PC systems. The ADM II supports standard ATA/IDE protocol with up to PIO Mode-4 and Multiword DMA Mode-2 interface.
ADM II has a built-in micro controller and file management firmware that communicates with ATA standard interfaces; therefore, the ADM II does not require additional or proprietary host software such as Flash File System (FFS) and Memory Technology Driver (MTD) software.
The ADM II is designed to work at either 5V or 3.3V voltage. It uses a standard ATA driver that is part of all major operating systems such as Windows 95/98 /2000 /NT /XP /CE, MAC, and UNIX.
Every ADM II comes with a factory-programmed, 20Byte long, unique identification numbers for extended data protection. This feature prevents unauthorized duplication by allowing encryption of customer data. The ADM II integrates a standard female connector for easy and cost effective mounting on top of a standard IDE male connector commonly found on the system motherboards. ADM II also offers user selectable Master/Slave operation through an external jumper setting.
ATA/IDE Standard Interface 512 Bytes per sector
ATA command set compatible
Support data transfer rate up to PIO Mode-4 / Multi-Word DMA Mode-2
Capacities Standard: 32, 64, 128, 256, 512 MB and 1GB, 2GB, 4GB
Low-Profile: 32, 64, 128, 256, 512 MB and 1GB, 2GB
Standard Female IDE Connector 40pin or 44pin
Low Power Consumption Active mode: 35mA/55mA (3.3V/5.0V, typical)
Sleep mode: 150µA/250µA (3.3V/5.0V, maximum)
Accept VCC power supply at pin 20 (40 pin ADM)
No need to use extend power core.
Sustained Access Performance PIO Mode-4: Up to 10MB/sec (Read), 6MB/sec (Write)
Multi-Word DMA Mode-2: Up to 11MB/sec (Read), 7MB/sec (Write)
Reliability Built-in ECC support corrects 3 bytes of error per 512byte sector
Implements dynamic wear-leveling algorithms to substantially increase longevity of flash media
Greater than 4,000,000 hours MTBF
Operation Temp. 0°C to 70°C for operation
-40°C to 100°C for storage
Extended Data Protection and Security Write protection jumper
Factory-programmed, up to 20-byte unique ID (Software Protect Mechanism)
RoHS Compliant
Upozornění: Obrázek a informace o produktu mají pouze informativní charakter.
