PRIMERGY TX industry standard tower servers: efficient, rock solid, record-breaking performance. PRIMERGY TX servers benefit from over 20 years pioneering work in the field of Green IT. That is how TX servers reach industry – leading performance
per watt ratios, lowering the environmental impact and running costs. TX servers can easily be managed locally or remotely via the PRIMERGY ServerView Suite, saving IT admin costs. That’s efficient performance. Our made-to-measure service packages
take care of your system every step of the way. Rest assured, PRIMERGY TX servers are put through 5000 boot cycles - that’s rock solid performance. PRIMERGY TX servers are flexible systems capable of using up to two processors and up to 20
hard disks. Tower to rack mounting kits are available for most TX systems to help you move to a consolidated rack infrastructure. TX servers have a tradition of setting record-breaking performance levels. So, whether you use them as tower or rack
servers, for file, print or application purposes, you will benefit from record-breaking performance. PRIMERGY TX: a tower of strength.
The PRIMERGY TX200 S5 is a perfect server for small or decentralized infrastructures in an attractive family design. The PRIMERGY TX200 S5 offers expandability, energy efficiency and dual processor performance. With up to 16 2.5”
hard disks, you can save on an external storage unit. The high energy efficiency minimizes costs. Moreover, a maximum of 96GB of RAM, redundancy features, and dual-processor performance allow you to make a great start into virtualization. The
PRIMERGY TX200 S5 also lends itself as a departmental, email or web server. A tower to rack conversion kit protects your investment’s lifetime. This great system strikes the right balance between price and performance.
Mainboard type D 2709
Chipset Intel® 5500 Processor quantity and type 1 - 2 x Intel® Xeon® processor 5500 series
Memory slots 12 (6 DIMMs per CPU, 3 channels with 2 slots per channel)
Memory slot type DIMM (DDR3) registered
Memory capacity (min. - max.) 1 GB - 96 GB
Memory protection Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Hot-spare memory support
Memory Mirroring support
Memory notes max. 96 GB registered, min. 1 GB unbuffered; memory mirroring with 2 identical modules, hot-spare memory with three identical modules per channel
Interfaces
USB ports 10 x USB 2.0 (3x front USB, 4x rear USB 3x intern for Backup, USSD and internal USB)
Graphics (15-pin) 1 x VGA
Serial 1 (9-pin) 1 x serial RS-232-C (9 pin), usable for iRMC S2 or System or common use
Serial 2 (9-pin) 1 x serial RS-232-C (9 pin), optional - occupies an unused slot
LAN / Ethernet (RJ-45) 1 x Gbit/s Ethernet (Intel Hartwell)
Service LAN (RJ45) 1 x dedicated Service LAN port for iRMC (10/100 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
SATA Controller ICH10R, 6-port SATA (4x for internal hard disks, 2x for accessible drives)
Trusted Platform Module (TPM) Infineon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express Gen2 x4 2 x full height (1x long, 1x short)
PCI-Express Gen2 x8 2 x full height (1x notched, thus usable for x16 cards operating in x8 mode)
PCI-Express x4 (mech. x8) 1 x full height
PCI slots 1 x
Slot Notes PCI slot: 32-bit / 33 MHz, 5 V; in SAS-configurations 1x PCI-Express slot is occupied by
the modular RAID-Controller
Drive bays
Hard disk bay configuration 4x 3,5-inch, for SAS / SATA or 8x 2,5-inch for SAS/SATA optional
Accessible drive bays 3 x 5.25/1.6-inch
Notes accessible drives All possible options described in relevant system configurator.
Optional hard disk bays 2 x 3.5-inch hot-plug SAS/SATA or 8x 2.5-inch hot-plug SAS in HDD box (occupies 2x
5.25-inch bays)
Fan Configuration
Fan configuration 2 standard fans or 2 redundant fans (only available in combination with hot plug redundant
power supply)
Operating panel
Operating buttons On/off switch
NMI button
Reset button